November 22, 2026

The Hidden Trade-offs of Power over Ethernet: Dan Ryan’s AI-Driven Quest for Vendor-Neutral Wireless Data

In the complex world of enterprise networking, the gap between a product’s marketing datasheet and its real-world performance can often be wide enough to swallow an entire deployment budget. For wireless engineers, one of the most persistent and frustrating variables is the behavior of modern access points (APs) when they are constrained by available power. As Wi-Fi standards evolve toward Wi-Fi 6E and Wi-Fi 7, the power requirements of these devices have surged, often outstripping the capabilities of existing switch infrastructures.

This specific challenge—and the lack of centralized, comparable data to solve it—is the catalyst for a new project by solution architect Dan Ryan. In a recent discussion with industry veteran Keith Parsons on the Packet Pushers podcast, sponsored by Meter, Ryan detailed his journey into building a comprehensive, vendor-neutral database designed to demystify the intricacies of access points and switches. Through his platforms, apcomparison.com and switchcomparison.com, Ryan is providing practitioners with the granular data they need to understand exactly what happens when high-performance hardware meets legacy power constraints.

The fundamental problem Ryan addresses is a common scenario in the field: an engineer plugs a state-of-the-art access point into a switch port that only supports the 802.3at (PoE+) standard. While the AP might power on and broadcast a signal, it rarely operates at full capacity. The industry has long lacked a unified way to see which features are silently disabled under these conditions. Ryan’s work aims to shed light on these "power-down" behaviors, ensuring that engineers are not blindsided by reduced performance after a rollout is already underway.

The scale of the task is immense. With dozens of vendors and hundreds of hardware revisions, manually cataloging every specification is a Herculean effort. To overcome this, Ryan leveraged the power of modern artificial intelligence. He explained that he utilized AI models to ingest thousands of pages of vendor documentation, pulling specific data points from PDFs that are often formatted in wildly inconsistent ways. However, relying on a single AI pass is insufficient for technical accuracy. Ryan’s methodology involves a "double-check" system where a second, independent AI model reviews the data extracted by the first. If discrepancies arise between the two models, Ryan steps in personally to verify the information against the original source material. This rigorous verification process ensures that the database remains a reliable resource for professionals who cannot afford errors in their network designs.

One of the most valuable aspects of the apcomparison.com database is its focus on the specific features that APs sacrifice when they are underpowered. When an access point is forced to run on 802.3at (approximately 30W) rather than the newer 802.3bt (UPOE or PoE++, ranging from 60W to 90W), the hardware must make compromises to stay within its power budget. Ryan and Parsons discussed the most common casualties in this power struggle. Often, the first feature to be disabled is the USB port, which many organizations use for IoT sensors or BLE beacons. Second uplinks and multi-gigabit Ethernet speeds are also frequently throttled, sometimes dropping a 5Gbps or 10Gbps link down to a standard 1Gbps connection.

More critically for wireless performance, underpowered APs often reduce the number of active spatial streams. A high-end 4×4:4 AP might revert to 2×2:2 operation, significantly cutting the device’s capacity and its ability to handle dense client environments. In other cases, the hardware may remain fully operational in terms of streams but will reduce the transmit power by several decibels (dB), shrinking the effective coverage area of the cell. These changes are often subtle and may not trigger an immediate failure alert, but they result in a degraded user experience that can be difficult to troubleshoot without knowing the hardware’s specific power-down logic.

Ryan shared a particularly illustrative anecdote regarding the latest generation of hardware: a Wi-Fi 7 wall plate access point. These devices are popular in hospitality and multi-dwelling units because they often feature a PoE pass-through port, allowing the AP to power a secondary device like a VoIP phone or an IPTV. Ryan discovered that this specific Wi-Fi 7 model would completely shut off its PoE pass-through capability if it did not receive a UPOE (802.3bt) power feed. For an engineer expecting to daisy-chain devices, this realization coming mid-installation could be catastrophic for the project timeline and budget.

The conversation also touched on the complexities of the 6 GHz band, introduced with Wi-Fi 6E and expanded in Wi-Fi 7. One of the most difficult pieces of information to extract from current vendor datasheets is the distinction between Standard Power and Low Power Indoor (LPI) operation. Because 6 GHz operation involves complex regulatory requirements—including the use of Automated Frequency Coordination (AFC) for standard power—vendors are often vague about these specifications in their general documentation. Ryan noted that this is one of the areas where the database provides significant value by attempting to centralize these elusive details.

While the current focus is on access points and switches, Ryan’s vision for a more transparent hardware ecosystem is expanding. During the discussion, he invited vendors and practitioners to contribute to the project, whether by submitting new entries or suggesting edits to existing ones. The goal is to move away from the "marketing-first" approach of traditional datasheets and toward a community-driven repository of technical truth.

Looking ahead, Ryan shared plans for further expansion of his comparison tools. He is exploring the development of sites dedicated to mounts and accessories, as well as an antenna comparison site. In the wireless world, the antenna is often the most misunderstood component, yet it is vital to the success of any specialized deployment, such as warehouses or outdoor stadiums. By applying the same AI-driven, multi-model verification approach to antennas, Ryan hopes to provide a level of clarity that has previously been unavailable to the general public.

Ultimately, the work being done at apcomparison.com and switchcomparison.com represents a shift in how the networking community handles information. In an era where hardware is becoming increasingly power-hungry and features are becoming more software-defined, having a vendor-neutral resource to verify what a device can actually do—rather than what it says it can do on the box—is becoming an essential tool for the modern network architect.

Episode Links:

Watch this episode on YouTube

AP Comparison

Switch Comparison